FD142 is a 4-port E1/T1/BRI interface and 2 Ethernet port failover appliance. It can better protect the unpredictable problems happen to the Asterisk PBX. It will provide an effective way to backup the Asterisk PBX when undesirable changes are detected (often when Asterisk fails or power-off of the system).
Support up to 4 Port Digital T1/E1/PRI/BRI + 2 Ethernet Port
Support multiple FD142 devices in one system
Support all compatible PRI and BRI interface cards
Unique highlight:1 USB power supply
Overview FD142 provides a reliable and flexible solution to Asterisk PBX.
FD142 is controlled through an Asterisk loadable module res_failover.so. This module keeps sending “running” signal to redundant server when Asterisk is running. Once Asterisk is down or system power is cut off, the module will not be able to send out the “running” signal to FD142 and thus it will automatically switch to the redundant server.
Technical Specifications
4 E1 / T1 / BRI ports and 2 Ethernet ports
Easy installation; uses USB to connect computer or server
Industry standard USB type B connector
USB 2.0 and 1.1 compliant
Two power supply indicator lights
Support the BRI or PRI circuit connection
Supports multiple FD142 devices in one system
Rack/Wall Mountable
Supports hardware watchdog
Low power consumption, takes power from USB bus
Fully supports Asterisk (Version1.2/1.4/1.6)
Dimension: 44cm*6.6cm*4.5cm
Weight: 1458g
Five Year Warranty!
OpenVox Asterisk IPPBX Failover Box - 4 Digital PRI T1 E1 BRI 1U w 2 ETH
1 / of1
📃
MORE PRODUCT INFORMATION
Quick shop
Choosing a selection results in a full page refresh.