OpenVox A1200E 12 Port Analog PCI-E Base Card, No Modules

MODEL: A1200E

This model has been discontinued and replaced with A1610P

OpenVox A1200P/E is a full-length analog PCI/PCI-E card. It can be used for connecting analog telephones and analog POTS lines through a PC.

The A1200P/E comes with 12 module banks. Each bank supports one analog interface. The module banks may be filled with up to 12 FXO or FXS modules enabling the creation of any combination of ports. Scaling of an analog card solution is accomplished by simply adding additional cards.

The A1200P/E works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.

Features

• Caller ID and Call Waiting Caller ID
• ADSI Telephones
• Loopstart Signaling Support
• Up to 12 Simultaneous PSTN Calls (Per PCI Slot)
• Interchangeable FXS and FXO modules

• Channel Bank Replacement / Alternative
• Small Office Home Office (SOHO) applications
• Small and Medium Business (SMB) applications
• Gateway Termination to analog telephones/lines

• Up to 12 ports through a combination of FXS and FXO modules
• Full-length analog card
• RJ45 connector
• 32 bit 33MHz PCI and fully PCI 2.2 compliant
• 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec
• Autosense compatibility with 5 V and 3.3 V PCI busses compatible
• Firmware accelerate I/O access to achieve high stability
• Power: 7W Minimum, 37W Maximum at 3.3 V or 5 V.
• Operation temperature: 0°C to 50°C
• Storage temperature: -40°C to 125°C
• Dimension: 312mm*106.7mm*16mm
• Weight: 161g

Operating Systems

• Linux (all versions, releases and distributions from 1.0 up)

Minimum Hardware Requirement

• 800-Mhz Pentium III
• 128MB RAM
• Available PCI/PCI-E Slot

Certifications

• RoHS Compliant
• FCC, CE and LVD