OpenVox TAP100 provides a 2U form factor for the tapping solutions.
With high capability, cost-effectiveness and high compatibility with international standards, OpenVox TAP100 can be widely used as a reliable tool in call recording application to tap E1/T1/J1 network in a variety of complex telephony environments.
Up to 2000 ohms high line impedance on tapped E1/T1/J1 transmission lines are provided for applying a non-intrusive tap by TAP100. And the 1:1 recovered signals are delivered to the monitor E1/T1/J1 equipment. As a result, there is no need to patch for the driver to increase the receiver sensitivity of the monitor.
The OpenVox TAP100 card, E1/T1/J1 cards or devices, and straight cables make a robust recording/monitoring solution on digital transmission lines. Straight cables are connected between the TAP100 and a pair of ports on the T1/E1/J1 cards, allowing both sides of the line to be monitored and recorded.
- High line impedance on tapped line
- No need for patching driver
- Small Size 2U Form Factor
- Integrates in Asterisk®
- Includes Low Profile PCI/ PCIe Short (Form Factor in 2U Chassis)
- 61.4× 87.5mm (PCB)
Power Requirments: 0.2A @5V
Operating Temperature: 0 – 50 °C
- FCC Part 15B，FCC Part68
- EN55022 Class B，EN55024
- EN60950 (Pending)